Timing Belt Instructions For A Chevy Aveo

This page has free videos, resources, e-books and more dedicated to Timing Belt Kit and Timing Belt Instructions For A Chevy Aveo!


Posted on

Mute the speaker Listen to this using a male or female voice M/F 

By James Marshall

The Chevrolet Aveo is a subcompact car manufactured by GM Daewoo since 2002 and marketed under the Chevrolet brand. The most common engine for the Chevrolet Aveo in the United States is a four-cylinder, 1.6-liter engine with a double overhead camshaft. The timing belt on this vehicle synchronizes the rotation of the crankshaft with the rotation of the camshafts. The most important part of the timing belt installation process is keeping the crankshaft and camshafts properly aligned during the procedure.

Mute the speaker Listen to this using a male or female voice M/F Remove the cable from the negative battery terminal with a socket wrench. Disconnect the front cover for the timing belt and remove the mounting bolts for the power steering pump if your vehicle is so equipped.

Mute the speaker Listen to this using a male or female voice M/F Place a socket wrench on the crankshaft bolt and turn the crankshaft clockwise. Align the timing mark on the crankshaft gear with the timing mark on the rear cover of the timing belt.

Mute the speaker Listen to this using a male or female voice M/F Loosen the retaining bolts on the water pump slightly. Turn the water pump counterclockwise with Special Tool J-42492-A to relieve the tension on the timing belt. Detach the timing belt from its gears.

Mute the speaker Listen to this using a male or female voice M/F Disconnect the cover for the engine with a socket wrench and detach the electrical wiring from the spark plugs. Remove the crankcase ventilation tubes and camshaft position sensor from the valve cover. Disconnect the valve cover and its gasket.

Mute the speaker Listen to this using a male or female voice M/F Hold the intake camshaft in place and remove the mounting bolt for the intake camshaft gear with a socket wrench. Disconnect the camshaft gear from the intake camshaft. Remove the camshaft gear for the exhaust camshaft in the same manner.

Mute the speaker Listen to this using a male or female voice M/F Install the camshaft gear for the intake camshaft while holding the camshaft in place. Tighten the mounting bolt for the camshaft gear to 49 foot-pounds with a torque wrench. Install the camshaft gear for the exhaust camshaft in the same manner.

Mute the speaker Listen to this using a male or female voice M/F Replace the valve cover and its gasket with a socket wrench. Attach the camshaft position sensor and crankshaft ventilation tube to the valve cover. Connect the electrical wiring for the spark plugs and attach the engine cover.

Mute the speaker Listen to this using a male or female voice M/F Turn the crankshaft clockwise to align the timing marks for the crankshaft and camshafts. Place the new timing belt onto the gears.

Mute the speaker Listen to this using a male or female voice M/F Turn the water pump clockwise with Special Tool J-42492-A to align the adjusting arm of the timing belt tensioner with the notch on the tensioner bracket. Tighten the retaining bolts for the water pump with a socket wrench.

Mute the speaker Listen to this using a male or female voice M/F Turn the crankshaft two complete turns clockwise with a socket wrench, and align the timing marks for the crankshaft and camshaft again. Repeat Step 9 and tighten the retaining bolts for the water pump to 89 inch-pounds with a torque wrench.

Mute the speaker Listen to this using a male or female voice M/F Install the mounting bolts for the power steering pump with a socket wrench and replace the front cover for the timing belt. Attach the cable for the negative terminal of the battery.

Share on Facebook Share on Twitter Email Gmail Yahoo! More...



Our Most Popular Article




More Timing Belt Kit Information

 Application Guide
FREE E-Book
 Now Dec 31 2012
FREE E-Book
 Timing Belt Kit
FREE E-Book
 K015419xs Part Info
FREE E-Book
 Service Kit
FREE E-Book
 Cam Belt Change
FREE E-Book
 Timing Belt Files
FREE E-Book
x